Superglue Tip Save Money Stop Super Glue Tubes From Drying Out Part 3

This is a great tip for anybody using the small tubes of superglue that dry out almost as soon as you open them. This is even for those who have successfully used my previous research findings to save money.  This tip takes just a few minutes but keeps your superglue from drying out for ages.  Try it and share it with friends and colleagues they will be grateful.  #fixed1tMONEYSAVINGtips

Superglue Tube Dry Out Fix Part 2

SuperGlue Tube Dry Out Fix - Part 2

We all use small tubes of SuperGlue to fix things.  But it is really irritating when you've had only a few drops out of the tube, and you go back to use it again and discover that its dried out or glue'd the cap onto the thin aluminum tube

WARNING - do not try to force the cap off, the tube with explode

spraying your hands, face and eyes with SuperGlue

Better To Stop It Drying Out In The First Place - Here's HOW!

#fixed1tMONEYSAVINGtips
#superglue

Home Made Polymorph Dog Bone Hair Dryer Shaping

Testing if a Home Made Polymorph Figure of Eight Dog Bone can be re-shaped using a standard hair dryer.




Its also very cheap, and if you screw up using it, you just chuck it back into a cup of hot water and start again, its that simple.

Click Here To Get A Great Price On eBay For Polymorph

How To Make Things With Polymorph Low Melt Plastic

#fixed1tMONEYSAVINGtips

Tiny Robot Playing With MAGNEXT iCOASTER

This video came about after 2.5 year old Oliver, his mum Katya and I had finished playing with his favourite toy, my MAGNEXT iCOASTER. He only gets to build and play with it supervised.  But he was concerned that Tiny Robot would sneak up and play with it when he wasn't here.

Tiny Robot is a Mini Robosapien

So his geeky Uncle fixed1t arranged for his Tiny Robot to sneak in and Play with my

MAGNEXT iCOASTER Metal Ball Roller Coaster

The mini Robosapien and the MAGNEXT iCOASTER are toys little Oliver and I fixed, he's so keen when he comes round and good with his Bob The Builder Plastic Screwdriver, he fixes everything with it and loves it.

#fixed1ttoyrepairshed

Adding New Life By Replacing Single Colour LEDs With Flashing MultiColour RGB LEDs

The best way to brighten up and boring old single colour LED toy, remote control or robot it to change the old dull single colour LED's for multi colour flashing RGB LEDs.

It's easy to do (if your careful and know how not to burn yourself of your toy with a soldering iron, and the effect can be quite stunning.

Whats even better, is that the latest LED's are so much brighter and clearer than their parents so look great when the light and turned off and everything it flashing.

The flashing rate of these LEDs is slow but impressive.

Here is a remote control I changed using this method.

 And here is a link to eBay where you can find them, as with some many commercial flashing chords etc taking priority list, the LEDs are hard to track down:

  RGB Flashing LEDs Direct Single Colour Replacements

#fixed1tTOYREPAIRSHED

The legs of the Sony AIBO ERS-210

The legs on the Sony AIBO ERS-210 robot dog are pretty sophisticated, and enclosed in tight fitting custom shell parts.

Each section of the leg is uniquely enclosed to ensure they do not interfere with each other.

Undoing the casing it tricky and with the sophisticated delicate electronics packed tightly in there is serious risk of damage.

Each limb joint has is own servos, control feedback circuits delicate flexible printed circuit board cables.  This is a great design methodology and it means there are no wire to get entangled and caught up.

Unfortunately, the special design of the flexible PCB cables and circuits means they are rarer than Hens Teeth, especially as Sony stop making them years ago, so damaging one go these cables can be fatal to the limb.

 Despite the rugged nature of the gait with which the AIBO's walk when wandering about, some of the smallest cables are in the ankles, can easily be broken by rough handling or chewing by a pet.

Each of the limb joints has is own potentiometer (pots) feedback pot, these are prone to dirt and dirt damage, as are any pots the one you use every day is the crackly volume control on your old hifi.

Within each of the limbs are complex gears linked to the servos, damage to these plastic gears is not uncommon and can prove fatal to the limb.

#fixed1tAIBOrepairs

AIBO Repair 2 : Blue ERS-210 Part 3 - Right Legs And Tail Jitters Fixed

AIBO Repair 2 : Blue ERS-210 Part 3 - Right  Legs And Tail Jitters Fixed

Having fixed the Jitters in the left legs, I worked on right front and back legs. I also noticed a lot of jittery in the tail, so I also fixed that. There are no AIBO repair people in the UK but with apprenticeship help from WOLFBOB in the USA, I'm doing it myself.  A UK owner contacted Bob and he recommended me, especially as my own had some rough handling during shipping which warranted his head having major repairs.  I'm confident doing legs and tail so plan to move onto Heads and Batteries.  Watch part 4 to see how I get on after cleaning the paint off its body. #fixed1tAIBOrepairs