Laptop Battery Case Best Opening Video And Re-Celling Video - Part 2

This video is about Laptop Battery Case Best Opening Video And Re-Celling Video - Part 2

This Video Is About How To Professionally Open An Old Apple Laptop Battery Case In A Few Minutes Without Destroying The Case, The Electronics Or The Batteries. How You Open The Case Affects Whether It Will Ever Work Again, Whether It Will Fit Back In The Laptop And Whether It Could Become A Hazard. The Gentler We Open It The Less Damage We Do To It.

This method works for all of the compact batteries I have re-celled for re-use but I've decided to share it after seeing more and more people recommending forcing the opening with sharp bladed knives, hammers, screw drivers and metal openers leaving some batteries just about usable and others in a complete mess. Also trying to force open anything with a screw driver or sharp knife risk serious if not permeant injury to your fingers, hands and eyes, and a potential catastrophic lithium fire with deadly flames and toxic fumes, so don't do it.

If You Want To See Part Three The Testing And Re-Celling And Replacing Of The Dead Batteries Then Please Subscribe For Date Of Part Three
- We'll Professionally Re-Cell The Battery Seal It And Test It In A Machine

If your thinking of getting into re-celling you need a decent battery welder, I bought a new Chinese Battery Welder cheaply from eBay but it shut down my electronics in my 30Amp Workshop, every time I switched it one, but for as few pounds or dollars I replaced the transformer inside and it works brilliantly now on a kitchen table. Here is the link: Right From Unboxing To Fully Repaired And Working: https://youtu.be/I7gAF0oXARI

Malcolm aka @FIXED1T ​

Stunt Kite Quick Fix Amazing Repair - Part 1

This video is about Stunt Kite Quick Fix Amazing Repair

I Bought This Great Stunt Kite From A Stall At Northampton Balloon Festival Over A Decade
Ago Before The Balloon Festival Was Banned On Health And Safety Grounds As People Were Actually Flying In The Balloons (Bonkers I Know. The Thing Is I Had Promised And Autistic Boy And His Brother To Taking Them Social Distancing Kite Flying On The Sunday.

How Too Many Lockdown Projects On The Go I Didn't Find The Kite Until Saturday Morning, And As I Took It Out Of It Bag I Realised The Rubber Supports Holding The Three Members Of The Kite Had Perished. Not Only That But The Two Offset Brackets Had Also Rotted Away. Knowing The Boy Doesn't Do Change I Decided I'd Better Figure Out A Good Way To Fix The Problem.

This Two Part Video Shows How I fixed1t For A Under Dollar In Just Over An Hour Without Breaking The The Main Support Members, Tearing The fabric Or Covering The Kite In Awful Messy Glue.

Please Don't Forget To Subscribe To Be Informed When Part Two Is Published And Check Out My Other Great Videos Including Fantastic Money Saving Tips.

Malcolm aka  @FIXED1T 

#fixed1tMONEYSAVINGtips